Home › Fault codes › U350200
U350200 — Engine electronics (DME) control unit – voltage on terminal 30 too high
Engine electronics (DME) control unit – voltage on terminal 30 too high. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U350200
How to read and clear U350200
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U350200 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Engine Control Module 1
| U178B00 | Rear axle power electronics control unit, freewheel fault in drive above freewheel speed threshold |
| U178C00 | Front axle power electronics control unit, freewheel fault in drive above freewheel speed threshold |
| U178D00 | Rear axle power electronics control unit – power reduction |
| U178E00 | Front axle power electronics control unit – power reduction |
| U300100 | Control unit – run-on fault |
| U350100 | Engine electronics (DME) control unit – voltage on terminal 30 too low |
All 274 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.