Home › Fault codes › U141400
U141400 — Terminal 30-4 power supply – open circuit
Terminal 30-4 power supply – open circuit. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U141400
How to read and clear U141400
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U141400 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Central Electrics
| U140000 | Function restriction – supply voltage too low |
| U140100 | Function restriction – supply voltage too high |
| U140500 | Terminal 15 signal line – signal implausible |
| U140A00 | Terminal 30 supply voltage – open circuit |
| U141200 | Terminal 30-2 supply voltage – open circuit |
| U141300 | Terminal 30-3 supply voltage – open circuit |
| U141500 | Terminal 30-5 power supply – open circuit |
| U141600 | Terminal 30-6 power supply – open circuit |
| U150000 | LIN bus 5 - electrical fault |
| U150100 | LIN bus 6 – electrical fault |
| U150300 | LIN bus 7 – no communication |
| U150400 | CAN bus front light (AFS) – no communication |
All 1472 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.