Home › Fault codes › U13AE00
U13AE00 — Active parking system control unit – fault detected
Active parking system control unit – fault detected. The Taycan, Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U13AE00
How to read and clear U13AE00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U13AE00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the On-Board Charger 2
| U111400 | Component protection – authentication failed (GFA) |
| U111500 | Component protection – not taught (SHE) |
| U111600 | Subnetwork operation not available |
| U112100 | Data bus - missing message |
| U112200 | Data bus - implausible message |
| U112300 | Data bus – fault value received |
| U140000 | Function restriction – supply voltage too low |
| U140100 | Function restriction – supply voltage too high |
| U140900 | Internal temperature measurement, Implausible signal |
| U16D300 | High voltage charger, pre-charging not successful |
| U300100 | Control unit – run-on fault |
All 110 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.