Home › Fault codes › U112400
U112400 — CAN bus - multiple installation detected
CAN bus - multiple installation detected. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U112400
How to read and clear U112400
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U112400 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Gateway
| U111500 | Component protection – not taught (SHE) |
| U111700 | Start-up-relevant adaptation not performed |
| U111F00 | Quick quiescent current mode, active |
| U112100 | Data bus - missing message |
| U112200 | Data bus - implausible message |
| U112300 | Data bus – fault value received |
| U112500 | LIN bus - multiple installation detected |
| U113900 | High-voltage charger - no communication |
| U114600 | Control module for special function 2, No communication |
| U114700 | Actuator for exterior noise, No communication |
| U115600 | Ctrl. module for rear-wheel drive, No communication |
| U116C00 | Aerodynamics control module, No communication |
All 374 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.