Home › Fault codes › U10F400
U10F400 — Alarm system sensors (in roof console) – no communication
Alarm system sensors (in roof console) – no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U10F400
How to read and clear U10F400
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U10F400 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Comfort System Module
| U107600 | LIN bus 2 - electrical fault |
| U10BA00 | LIN bus 1 – no communication |
| U10C800 | LIN bus 3 - no communication |
| U10DB00 | LIN bus 3 - electrical fault |
| U10DC00 | LIN bus 4 - electrical fault |
| U10F300 | Alarm siren – no communication |
| U110000 | Component protection – not taught |
| U110100 | Component protection active |
| U110300 | Production mode active |
| U110400 | Expanded bus operation active |
| U111400 | Component protection – authentication failed (GFA) |
| U112100 | Data bus - missing message |
All 616 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.