Home › Fault codes › U10DA00
U10DA00 — Coding invalid
Coding invalid. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U10DA00
How to read and clear U10DA00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U10DA00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Front Assist Camera
| U101300 | Coding |
| U101600 | Control unit for brake electronics (PSM) – signal implausible |
| U103100 | FlexRay data bus, No synchronization |
| U104600 | Lane change assistance control module, Implausible signal |
| U105400 | Central computer control unit - missing message |
| U106E00 | FlexRay data bus - signal error |
| U110000 | Component protection – not taught |
| U110100 | Component protection active |
| U110300 | Production mode active |
| U110E00 | Coding |
| U111500 | Component protection – not taught (SHE) |
| U111700 | Start-up-relevant adaptation not performed |
All 336 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.