Home › Fault codes › U107A00
U107A00 — Front camera control unit - no communication
Front camera control unit - no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U107A00
How to read and clear U107A00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U107A00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Engine Control Module 1
| U104000 | Rear-differential lock control unit - signal implausible |
| U104100 | Rear-differential lock control unit - signal implausible |
| U104500 | Lane Change Assist control unit (master) - no communication |
| U105400 | Central computer control unit - missing message |
| U105500 | Central computer control unit – signal implausible |
| U106E00 | FlexRay data bus - signal error |
| U108E00 | Multi-function steering wheel, LIN bus - no communication |
| U10BA00 | LIN bus 1 – no communication |
| U10EC00 | Internal CAN, Implausible signal |
| U110000 | Component protection – not taught |
| U110100 | Component protection active |
| U110300 | Production mode active |
All 274 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.