Home › Fault codes › U012600
U012600 — Steering-angle sensor - no communication
Steering-angle sensor - no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U012600
How to read and clear U012600
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U012600 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Brake Electronics
| P258D00 | Activation of vacuum pump for brake - short circuit to B+ |
| U008000 | FlexRay data bus - synchronization |
| U008100 | Vehicle Communication Bus F Performance |
| U008A00 | Vehicle Communication Bus G Performance |
| U010000 | Engine electronics (DME) control unit – no communication |
| U010100 | Lost Communication with TCM |
| U012700 | Lost Communication With Tire Pressure Monitor Module |
| U012A00 | Control unit for chassis control (PASM) – no communication |
| U013400 | Lost Communication With Power Steering Control Module - Rear |
| U014100 | Front-end electronics control unit (BCM1) - no communication |
| U015100 | Airbag control unit - missing message |
| U01B400 | Brake booster control unit - no communication |
All 317 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.