Home › Fault codes › P283100

P283100 — Shift Fork "A" Position Circuit

Shift Fork "A" Position Circuit. The Taycan, 911 (992), Panamera (971) and Panamera (972) report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set P283100

Porsche Taycan

Engine Control Module 1

Porsche 911 (992)

PDK Transmission

Porsche Panamera (971, 2017–2023)

PDK Transmission

Porsche Panamera (972, 2024–)

PDK Transmission

How to read and clear P283100

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and P283100 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Engine Control Module 1

P276B00Transmission oil pump – supply voltage too low
P276C00Transmission oil pump – supply voltage too high
P277D00Transmission oil pump – overtemperature
P278700Multi-plate clutch, 2nd gear – temperature too high (for warning level see F1 help)
P27A300Transmission oil pump – fault
P27A600Transmission oil pump – mechanical fault
P288600Shift monitoring, dog clutch, selection attempt failed
P304000Transmission position implausible
P305200Terminal 50, feedback line - short circuit to B+
P305300Terminal 50, feedback line - short circuit to ground/open circuit
P32F200Electric driving performance too low due to high-voltage battery current discharge limit
U002800Hybrid CAN bus – faulty

All 274 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.