Home › Fault codes › P276B00

P276B00 — Transmission oil pump – supply voltage too low

Transmission oil pump – supply voltage too low. The Taycan report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set P276B00

Porsche Taycan

Engine Control Module 1

How to read and clear P276B00

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and P276B00 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Engine Control Module 1

P26E600Starter relay 2 - short circuit to B+
P26F000Starter relay 1 - does not switch
P26F200Starter relay 2 - does not switch
P270000Multi-plate clutch, 2nd gear – implausible
P270100Dog clutch – implausible
P271F00Selector support – position not learned
P276C00Transmission oil pump – supply voltage too high
P277D00Transmission oil pump – overtemperature
P278700Multi-plate clutch, 2nd gear – temperature too high (for warning level see F1 help)
P27A300Transmission oil pump – fault
P27A600Transmission oil pump – mechanical fault
P283100Shift Fork "A" Position Circuit

All 274 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.