Home › Fault codes › P1D3C00

P1D3C00 — Shift monitoring, dog clutch – disengagement fault during gearshifts

Shift monitoring, dog clutch – disengagement fault during gearshifts. The Taycan report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set P1D3C00

Porsche Taycan

Engine Control Module 1

How to read and clear P1D3C00

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and P1D3C00 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Engine Control Module 1

P1D3600Multi-plate clutch, 2nd gear – temperature too high, warning stage 2
P1D3700Transmission oil temperature too high, warning stage 1
P1D3800Transmission oil temperature too high, warning stage 2
P1D3900Transmission oil temperature too high, warning stage 3
P1D3A00Transmission oil pump – speed signal missing
P1D3B00Transmission oil temperature sensor – signal implausible
P1D3D00Shift monitoring, dog clutch – error engaging during shift
P1D3E00Gear shift monitoring, gear wheel set – blocked during downshift
P1D3F00Shift monitoring, multi-plate clutch, 2nd gear – disengagement fault during gearshifts
P1D4000Shift monitoring, multi-plate clutch, 2nd gear – engagement fault during gearshifts
P1D4100Speed control, electric machine - not available
P1D4200Shift monitoring, dog clutch, timeout during engagement

All 274 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.