Home › Fault codes › P0C4900
P0C4900 — Additional coolant pump in low-temperature circuit (P2) – PWM signal, short circuit to B+
Additional coolant pump in low-temperature circuit (P2) – PWM signal, short circuit to B+. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P0C4900
How to read and clear P0C4900
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P0C4900 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Battery Energy Control Module
| P0BBD00 | Hybrid Battery Pack Voltage Variation Exceeded Limit |
| P0C4300 | Temperature sensor for low-temperature circuit (TME: TW7 / BMS: HV battery input) – signal implausible |
| P0C4400 | Temperature sensor for low-temperature circuit (TME: TW7 / BMS: HV battery input), short circuit to ground |
| P0C4500 | Temperature sensor for low-temperature circuit (TME: TW7 / BMS: HV battery input), short circuit to B+ |
| P0C4700 | Additional coolant pump in low-temperature circuit (P2) – no communication |
| P0C4800 | Additional coolant pump in low-temperature circuit (P2) – PWM signal, short circuit to ground |
| P0C4A00 | Auxiliary coolant pump in the low-temperature circuit (P2) – error |
| P0C4C00 | Additional coolant pump in low-temperature circuit (P2) – short circuit to ground |
| P0C4D00 | Additional coolant pump in low-temperature circuit (P2) – short circuit to B+ |
| P0C7800 | Hybrid/EV Battery System, Precharge Time Too Long |
| P0CA600 | High-voltage battery – charging current too high |
| P0CA700 | Hybrid Battery Discharging Current High |
All 198 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.