Home › Fault codes › C12B3FD
C12B3FD — Driver assistance systems front camera, Temporary view limitation
Driver assistance systems front camera, Temporary view limitation. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C12B3FD
How to read and clear C12B3FD
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C12B3FD shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Front Assist Camera
| C12B3F7 | Driver assistance systems front camera, Limited vision due to masking |
| C12B3F8 | Driver assistance systems front camera, Vision limited due to damage to windshield |
| C12B3F9 | Driver assistance systems front camera, Temperature too low |
| C12B3FA | Driver assistance systems front camera, Communication malfunction |
| C12B3FB | Driver assistance systems front camera, Malfunction |
| C12B3FC | Driver assistance systems front camera, View permanently limited |
| C12B3FE | Driver assistance systems front camera, View restricted due to defective pixels |
| C12D1F2 | Airbag control module, Signal not qualified |
| C12D5F1 | Driver assistance systems control module, LP-DDR2 temperature too low |
| C12D5F2 | Driver assistance systems control module, LP-DDR2 temperature too high |
| C12D5F3 | Driver assistance systems control module, Park assist short circuit to B+/open circuit |
| C12D5F4 | Driver assistance systems control module, Image processing processor overheating |
All 336 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.