Home › Fault codes › C12B3F9
C12B3F9 — Driver assistance systems front camera, Temperature too low
Driver assistance systems front camera, Temperature too low. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C12B3F9
How to read and clear C12B3F9
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C12B3F9 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Front Assist Camera
| C12B3F1 | Driver assistance systems front camera, Initial calibration limit value exceeded |
| C12B3F2 | Driver assistance systems front camera, Incorrect Vehicle Identification Number (VIN) |
| C12B3F3 | Driver assistance systems front camera, Implausible chassis number |
| C12B3F6 | Driver assistance systems front camera, Vision limited due to dirty windshield |
| C12B3F7 | Driver assistance systems front camera, Limited vision due to masking |
| C12B3F8 | Driver assistance systems front camera, Vision limited due to damage to windshield |
| C12B3FA | Driver assistance systems front camera, Communication malfunction |
| C12B3FB | Driver assistance systems front camera, Malfunction |
| C12B3FC | Driver assistance systems front camera, View permanently limited |
| C12B3FD | Driver assistance systems front camera, Temporary view limitation |
| C12B3FE | Driver assistance systems front camera, View restricted due to defective pixels |
| C12D1F2 | Airbag control module, Signal not qualified |
All 336 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.