Home › Fault codes › C111454
C111454 — Lane change assistance control module, No basic setting
Lane change assistance control module, No basic setting. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C111454
How to read and clear C111454
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C111454 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Lane Change Assist
| B2F0300 | Development code 3 |
| B2F0400 | Development code 4 |
| B2F0500 | Development code 5 |
| B2F0600 | Development code 6 |
| C10A700 | Rolling test mode active |
| C10C200 | Function restriction |
| C1114F0 | Lane change assistance control module, Automatic calibration not possible |
| C1114F3 | Lane change assistance control module, Restricted view |
| C111554 | Lane change assistance control module 2, No basic setting |
| C11E7F0 | Yaw rate, calculated offset too high |
| C11E8F0 | Steering angle, calculated offset too high |
| C11E900 | Tire size-related speed deviation, too high |
All 61 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.