Home › Fault codes › C10BC04
C10BC04 — Left parking brake motor, faulty
Left parking brake motor, faulty. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C10BC04
How to read and clear C10BC04
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C10BC04 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Brake Electronics
| C106AF0 | ABS valves supply voltage, implausible |
| C106B29 | Wheel speed sensor, Implausible signal |
| C109C07 | ASR/ESP button, mechanical malfunction |
| C10A5F0 | ABS hydraulic unit, Brake affect too low |
| C10A700 | Rolling test mode active |
| C10BC01 | Left parking brake motor, Electrical error |
| C10BC07 | Left parking brake motor, mechanical malfunction |
| C10BC19 | Left parking brake motor, Current High |
| C10BCF1 | Left parking brake motor, Upper travel limit exceeded |
| C10BCF6 | Left parking brake motor, Engine speed implausible |
| C10BCF8 | Left parking brake motor, locked |
| C10BCF9 | Left parking brake motor, Insufficient clearance |
All 317 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.