Home › Fault codes › B191EF0
B191EF0 — Universal charging cable – fault present
Universal charging cable – fault present. The Taycan, Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B191EF0
How to read and clear B191EF0
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B191EF0 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the On-Board Charger
| B139700 | Function restriction, crash signal |
| B17FF00 | High-voltage charger, charging module – sensor fault |
| B184BF0 | Temperature sensor, Power reduction due to excessive temperature |
| B184C00 | Release active |
| B191CF8 | Charge port door – communication error |
| B191CF9 | Second plug detected |
| B192BF0 | High-voltage DC charger (booster) in wrong mode |
| B192E11 | Charging socket (AC), searchlight – short circuit to ground |
| B192E12 | Charging socket (AC) searchlight – short circuit to B+ |
| B192E13 | Charging socket (AC) searchlight – open circuit |
| B193A11 | High-voltage DC voltage sensor 1, Short circuit to Ground (GND) |
| B193A12 | High-voltage DC voltage sensor 1, Short circuit to B+ |
All 221 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.