Home › Fault codes › B129E07
B129E07 — Display and operator control unit continuously actuated
Display and operator control unit continuously actuated. The 911 (992), Panamera (971) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B129E07
How to read and clear B129E07
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B129E07 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the MIB2 (Zentralrechner)
| B129B12 | Microphone 1 - short circuit to B+ |
| B129B13 | Microphone 1, Open circuit |
| B129C11 | Microphone 2 - short circuit to ground |
| B129C12 | Microphone 2 - short circuit to B+ |
| B129C13 | Microphone 2, Open circuit |
| B129D07 | Information electronics remote control 2, mechanical malfunction |
| B130C11 | Double subwoofer speaker 1, Short circuit to ground |
| B130C12 | Double subwoofer speaker 1, Short circuit to B+ |
| B130C13 | Double subwoofer speaker 1, Open circuit |
| B130CF0 | Double subwoofer speaker 1, Short circuit to each other |
| B130D11 | Double subwoofer speaker 2, Short circuit to ground |
| B130D12 | Double subwoofer speaker 2, Short circuit to B+ |
All 668 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.