PADM (Dynamische Aggregatelagerung): fault codes
All 17 fault codes of the Porsche 911 (992) PADM (Dynamische Aggregatelagerung) with the manufacturer's names. How to read and clear them with STEUER14.
| Code | Fault |
|---|---|
| B200000 | Control unit – function restriction |
| B2008F0 | Function restriction, temperature – above limit value |
| B2009F0 | Function restriction, temperature - below limit value |
| B201500 | Production mode active |
| C10EE00 | Rolling test mode - fault |
| C12EF00 | New installation detected |
| C200200 | Coding |
| U101100 | Supply voltage – too low |
| U101200 | Supply voltage – too high |
| U101300 | Coding |
| U110000 | Component protection – not taught |
| U112100 | Data bus - missing message |
| U112200 | Data bus - implausible message |
| U112300 | Data bus – fault value received |
| U120100 | Data bus, No communication |
| U140000 | Function restriction – supply voltage too low |
| U140100 | Function restriction – supply voltage too high |
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.